Choosing your Proper Tow Ball

 

The proper selection of a good tow bar ball Toowoomba depends on the type of car, vehicle, or trailer. It is important to know how to evaluate and select each component of the hitch system. Each towing situation is different from one another. Moreover, each piece of towing equipment must be suitable for the individual set up alone.

What is a tow ball?

A tow bar ball Toowoomba is known as the trailer ball or hitch ball which is a ball in shape attachment that connects the retailer to the hitch. The ball allows the trailer to pivot, giving a smooth turning while towing. Each ball has its standard size and their weight rating also differ. The rating of the hitch ball is just as necessary as the receiver hitch rating. The removable hitch ball with a shaft that slides into the receiver tube of the truck and fastens with a pin and clip is a ball mount. There are different ball mounts to be used to raise or lower the height of the tow ball to allow for level trailer towing.

Things to consider when choosing tow ball

The weight to tow

There are different ranges of ball hitch sizes and weight capacities range from 2000 up to 30,000 lbs. When selecting a trailer ball, the weight should be always the thing to consider. There is a designated part to verify the trailer's weight which is on the half front left side of the trailer. The weight rating of the tow bar ball Toowoomba must match or exceed the Trailer's GVWR or gross vehicle weight rating which is the total maximum amount the trailer can safely weigh when loaded.

The kind of tow ball diameter for the trailer's head

Most trailer manufacturers stamp or label the correct trailer ball size on the coupler. The trailer requires having a ball that perfectly matches the size of its coupler. Having the match coupler and towball ensures that the towing system has a solid connection. By finding its measurement, you can use the tape measure to find out. The diameter of the tow ball must match the size of the trailer's coupler opening size.

The size and class of the receiver

There are two connections that must happen to be fit to each other to make the towing system real good and effective, the ball and the receiver hitch. The shaft of the ball mount must match the size of the truck's receiver tube opening. To measure the receiver hitch tube, measure it inside the tube opening.

The count of rising or drop needed to supply a level of safe towing

When loaded, both the truck and the trailer must be level with the ground to assure that there will be a safe towing. That is why the rise and drop of the tow ball have to be provided conveniently.  If the trailer rides lower or higher than the truck, a specific ball mount can be used to make up the distinction and ensure the trailer is level.  Make sure that the ball mount has to meet the height of the loaded trailer to guarantee an effective towing system.